The Surat Art Silk Cloth Manufacturers Association
 
 
Home   Inquiry   Contact Us
 
 
 
Cell : +91-261-2426369, 2422349
 
Whats New? | Archive
Home About Us Committee Trade Inquiry From President's Desk Contact Us  
 
 
     
     
     
     
 
History -----------------------------01
 
Catalogue -------------------------02
 
Photo Gallery ---------------------03
 
Textile Industries ---------------04
 
Activities ---------------------------05
 
Surat -------------------------------06
 
 
 
 
 
  TEXTILE INDUSTRIES  
 
 
     
     
 
  Textile Industries
 
     
  Financial Institution
     
  Fabrics
     
  Other Information
     
  Annex-H
     
  Annex-V
     
  Annex-F3
     
  Annex-F4
     
  Annex-G
     
  Annex-B-1
     
  Annex-C
     
  Annex-D2
     
  Annex-E
     
  Annex-E1
     
  Annex-F2
     
  Annex-I
     
  Annex-II
     
  Annex-IV
     
  Annex-PI
     
  Benefit-A
     
  Calculation
     
  Identification of Yarns
     
  Eligible Machinery
     
  Annexure
     
  Identify Defects
     
  NCDC
     
  Powerloom
     
  Tuffs
     
  Upgradation
 
 
 
  Annex-IV
   
  LIST OF MACHINES ELIGIBLE FOR WEAVING / KNITTING UNITS UNDER TUF SCHEME
   
   
 
a. For Weaving Preparatory :

1. Single yarn sizing machine.
2. High speed multi cylinder sizing machine/zero twist sizing machine.
3. Super high speed direct beam warper with creel (for shuttleless looms.)
4. High speed direct beam warper with creel (for shuttleless looms in the case of woollen units).
5. High speed direct beam warper with creel (for automatic looms.)
6. Warp tying machine.
7. Automatic drawing-in-machine/Reaching-in-machine.
8. Fully automatic pirn winding machine (for automatic looms.)
9. Hydraulic beam lifting trolly (for shuttleless looms.)
10. Computer aided design system for weaving (optional.)
11. Two-for-one twister / Three-for-one twister operating at the speed of minimum 8000 rpm &       5000 rpm, respectively.
12. Draw warping and sizing machine-
13. False twist-texturising machine having 800 meters / min speech
14. Fancy yarn twisters and doublers with micro processors / Cut Chennile Yarn Machine.
15. Yarn singeing machine
16. Sectional warping machine with autostop & tension control
17. Cone dyeing machine.
18. Pirn winding machine.
19. High speed multi-cylinder vertical exit warping machine.

b. For Loom Shed (Weaving) :

1. Shuttleless loom of width 180 cm and above for Projectile and Rapier looms (including high speed rapier weaving looms with 1152 hooks jacquard machine and intermittent cutting knife fitted for making the tapes and attachment required for manufuring of labels of different widths)' and 165 cms. and above for Airjet looms, 150 cms. and above for Waterjet looms with weft insertion rate of :
i) 800 mtrs. per minute and above for Projectile looms. Marginal deficit of upto 5% in that weft insertion rate of old suizer projectile weaving machine is permitted
ii) 450 mtrs. per minute and above for other shuttleless looms, for S S I units, the weft insertion rate of Rapier shuttleless looms may be 250 mtrs. per minute and above.
2. Shuttletess loom of width 160 cm & above (for woollen units) :
i) 800 mtrs. per minute and above for Projectile looms and
ii) 450 mtrs. per minute and above for other shuttleless looms. For SSI units, the weft insertion rate of Rapier shuttleless looms may be 250 mtrs. per minute and above.
3. Automatic shuttle loom. (Minimum 160 cms. and 165 cms. width for woollen and non-woollen weaving units respectively). Provided that the registered SSI weaving units which are exclusively engaged in the production of silk sarees. dhoties and do not propose to change their produd line are allowed to acquire the automatic shuttle loom with a minimum width of 140 cms.
3A. Semi-automatic shuttle loom by way of upgradation of existing plain looms of width 140 cms, minimum, with additional features like weft stop motion, warp stop motion, positive / semi-positive let off motion with or without dobby / Jacquard, applicable only to the decentralized powerloom sector.
3B. Replacement of an ordinary loom by a new semi-automatic shuttle loom of minimum width of 165 cms. with benchmarked technology features, i.e., weft exhaust / stop motion, warp stop motion, warp protector attachment, let off motion (positive/semi-positive), under-picking motion, take-up motion together with anti-crak motion, efficient braking device to stop the loom within a pick, individual motor drive with clutch system and push button with inching arrangement for starting and stopping and inching, preferably with the following additional features :

(i) lubricating nyion parts / accessories, auxiliary buffer for picking stick;
(ii) all metallic parts of casting and mild steel should conform to relevant BIS standards; and (iii) in case of velvet looms, the ordinary cam motion should be replaced by modern cam motion which reduces the multiple lever or by positive dobby.
Provided that the registered SSI weaving units which are exclusively engaged in the production of silk sarees, dhoties and do not propose to change their product line are allowed to acquire the semi automatic shuttle loom of above technological parameters with a minimum width of 140 cms. Applicable only to the decentralized powerloom sector,

3C. New units in the decentralized powerloom sector are permitted to install semi-automatic looms withbenchmarked technology features under TUFS.
4. Terry towel loom (fully automatic or shuttleless.)
5. Corduroy and/or velvet loom and/or automatic loom for cut-pile fabrics-
6. Canvas loom.
7. Pawer driven chenille loom.
8. High speed needle loom for tape/belt weaving.
9. Auto control type of humidification plant [for shuttleless loom shed.)
10. Modem industrial humidification system for controlling relative humidity & temperature (for
     automatic loom shed.)
11. Over head cleaner for air jet looms.
12. Dust separator.
13. Computerised label making machine.
14. Fabric embroidery machine.
15. Jacquard and Dobby on stand - alone basis.
16. Power driven cloth cutting machine / laser fabric or label cutting machine.
17. Air Compressor 15 H.R and above.

c. For Knitting :

1. High speed circular knitting machine with a minimum speed of 23 revolutions per minutes for     new machines and 20 revolutions per miniute for permissible second hand reconditioned     machines.
2. High speed socks knitting and gloves knitting machines with or without electronic jacquard.
3. Computerised flat bed knitting machine with minimum speed of 11 revolutions per minute for     new machines and 10 revolutions per minute for permissible second hand reconditioned     machines.

4. (a) Warp / Raschel knitting machine.

    (b) High speed computerised warping machine for knitting.

5. Computerised label making machine.
6. Modern industrial humidification system for controlling relative humidity & temperature.
7. Air Compressor 15 H.R and above.
8. Computerized Strap (Collar / Cuff) Flat Bed Knitting Machine.

Cc(a) Handloom:

1. Semi-automatic / ordinary frame handloom with minimum width of 52", with or without     dobby/jacquard and benchmarked technology features, viz., take-up motion, smooth sley     movement, bigger shuttle and bobbin (minimum 4"), negative let-off motion. It may include     attachments such as multiple weft butta mechanism, pick & pick sliding shuttlebox, solid     border weaving catchcord attachment. The frame loom should be made out of 1/2" X 1 1/2"     X 3" steel U channel or steel pipe 2 1/2" diameter and 8 gauge or sturdy wood with minimum     4" width X 4" thick K 6' height. The looms may have additional warp and cloth rollers made     of wood or steel to ensure weaving of long length fabric.

cc(b). Handlooms of fly shuttle frame loom fitted with Dobby like lattice / barrel / tappet / draw bar / iron frame vertical / centre closed shed / wooden frame vertical / double cylinder iron border. Jacquard like single lift single cylinder wooden frame/single lift single cylinder iron frame bar / double lift single cylinder iron frame / double lift double cylinder iron frame / janata / lino; Combination of jala and dobby or jacquard; Fly shuttle sley fitted with drop box on one side Drop box on both sides / circular shuttle box / pick & pick sley;

cc(c). Fly shuttle frame loom fitted with let off motions like lever and weight let off motions/ special spring motion / rope let off motion / weight system / spring system.

Cc(d).
Fly shuttle frame loom fitted with take up motion like ratchet & pawl motion / 3 wheel Ichalkaranji typemotion/5 wheel take up motion without emery roller/7 wheel take up motion.

Cc(e).
Handlooms fitted with special attachments like catch card system / swivel loom / lappet motion / terry mertion / lino mechanism / chennaile weaving [automatic cutting of chennaile while weaving), metal frame handloom / wider width wooden frame handloom / long length doth weaving mechanism etc.

cc(1)
Winding machine with multi spindle for preparation of pirns/ bobbins / drums operated by hand / peddle / power.

cc(2)
High Speed Doubling machine having spindle fitted on bolster with ball bearing.

cc(3)
The mobile textile quality testing equipment only for handloom sector and capable of testing all of the

following :
* Colour fastness to washing at about 40 degree Celsius
* Colour fastness to crocking / rubbing
* Shrinkage
* Ends - Picks per inch
* Count of yam
* Percentage crimp of yarn
* Fabric width, and
* Grams per Square meter etc.

The effective date of eligibility will be the date of the meeting, i.e, 1.8,2002-

d. Any Other Machinery Considered Appropriate by the Technical Advisory - Cum - Monitoring Committee (TAMC.)

 
     
 
     
 
     
   
 
     
 
History --------------------01 Photo Gallery -------------------03 Activities -------------------05
     
Catalogue ----------------02 Textile Industries --------------04 Surat -----------------------06
Copyright © 2011 - 2012 Sascma.org. All right reserved.
 
Website Design By DRUVAAN Softech